Seat Altea 2014, Руководство пользователя

Страница: 264 / 301

262 If and when
Number Consumer Amps
29
a)
Electric windows (front and back) 50
Electric windows (front) 30
30 Ignition key 50
a)
Ampere rating according to motorisation 
Bulb change
General notes
Before changing any bulb, first turn off the failed component.
Do not touch the glass part of the bulb with your bare hands. The finger-
prints left on the glass will vaporise as a result of the heat generated by the
bulb, causing a reduction in bulb life and condensation on the mirror sur-
face, thus reducing effectiveness.
A bulb must only be replaced by one of the same type. The type is indicated
on the bulb, either on the glass part or on the base.
It is highly recommended to keep a box of spare bulbs in the vehicle. At the
very least, the following spare bulbs, which are essential for road safety,
should be kept in the vehicle.
Main headlights
- H7
- H1
- W5W
- PY21W
Xenon
1)
/adaptive headlights
- D1S
2)
- P21W SLL
- W5W
- PY21W
Fog light
- H3
Fixed tail light
- P21W
3)
- P21W
Mobile rear lid light
- P21W
- P21W
- W5W 
Dipped beam
Main beam
Side
Turn signal
Dipped and full beam
Daylight
Side
Turn signals
Fog light
Stop/Position
Turn signal
Fog light (driver side)
Reverse (passenger side)
Side
1)
On this type of headlight, the bulb changes must be made by the Technical Service, given
that complex elements must be removed from the vehicle and a reset must be made on the
automatic control system incorporated.
2)
The Xenon bulbs discharge 2.5 times the light flux and have an average lifespan of 5 times
more than that of halogen bulbs, this means that, except due to unusual circumstances,
there is no need to change the bulbs for the whole life of the vehicle.
3)
Electronically controlled single filament bulb for Stop/side bulbs. If the bulb blows it will
not work in either position or Stop.