Seat Alhambra 2019, Руководство пользователя

Страница: 294 / 380

Driving
●
When cleaning the sensors with high-
pressure or steam cleaning equipment,
spray the sensors briefly at a distance of
no less than 10 cm (4 inches).
Note
Acoustic sources may lead to erroneous
warnings on the parking sensor system, e.g.
rough tarmac, cobbles or the noise of other
vehicles.
Connecting and disconnecting
Fig. 270
Detailed view of the centre console:
button to connect or disconnect the park as-
sist.
Fig. 271 Parking sensor system sensors on the
front bumper
●
Press the

button when the ignition is
switched on
›››
Fig. 270 .
●
Automatic connection: engage reverse
gear.
●
Automatic disconnection: drive faster than
15 km/h (9 mph).
The button lights up when the function is
switched on.
Special characteristics
●
The parking aid system sometimes detects
water on the sensors as an obstacle.
●
If the distance does not change, the warn-
ing signal will sound less loudly after a few
seconds. If the continuous signal sounds, the
volume will remain constant.
●
When the vehicle moves away from the ob-
stacle, the beeping sound automatically
switches off. On approaching the obstacle
again, the beeping sound will automatically
switch back on.
●
If the electronic parking brake is engaged
or the selector lever is set to P , no audible
warning will be emitted.
●
Your technical service centre can adjust the
volume of the warning signals.
Note
If the parking aid system is faulty, a contin-
uous audible warning will sound when it is
switched on for the first time, and the but-
ton will flash. Press the button to discon-
nect the park assist and have the system
checked as soon as possible by a special-
ised workshop.
292