Seat Alhambra 2019, Руководство пользователя, Страница: 170 / 380

Operation
batteries and all other batteries over 20
mm out of reach of children.
● If you suspect that someone may have
swallowed a battery, seek immediate med-
ical attention.
CAUTION
●
The radio frequency remote control con-
tains electronic components. Therefore,
avoid getting it wet and exposing it to
knocks or direct sunlight.
●
The use of inappropriate batteries may
damage the radio frequency remote con-
trol. For this reason, always replace the
used battery with another of the same volt-
age, size and specifications.
For the sake of the environment
●
Please dispose of your used batteries
correctly and with respect for the environ-
ment.
●
The remote control battery may contain
perchlorate. Observe the legal provisions
regarding disposal.
●
Care should be taken so as not to oper-
ate the remote control unintentionally so
as to prevent the auxiliary heater being
switched on accidentally.
Programming the auxiliary heater
Before programming it, check that the vehi-
cle's date and time are set correctly
›››
.
Opening the
Auxiliary heater
menu on
the instrument panel
●
From the main menu, select the
Auxiliary
heater
submenu and press the

but-
ton on the wiper lever.
●
OR: press the
 
or
 
buttons on the
multifunction steering wheel until the
Auxil-
iary heater
menu is displayed.
Function button: function
Activate
,
Deactivate
: The auxiliary heater can
be set to come on automatically if required. Select a
timer for this purpose:
– The timer will be marked with a

.
– Only one timer can be selected at a time. If a
timer has been selected, the screen will display
Program. ON
. If no timer has been selected,
the instrument panel display will show
Prog. OFF .
– To change a programmed timer you must ei-
ther select a different timer or select
Deacti-
vate
.
Timer 1 - 2 - 3
: Three different timers (hh.mm)
can later be selected using the
On
option. If the auxil-
iary heater is to be switched on for just a certain day
of the week, select the day of the week and the time
for the auxiliary heater to come on.
Function button: function
Duration
: The operating time may vary between 10
and 60 minutes and can be set to 5-minute intervals.
Operating mode
: Set to heat or ventilate the vehi-
cle interior when the auxiliary heater is switched on.
Day
: Set the current day of the week.
Factory settings
: The predefined factory val-
ues for the functions of this menu are restored.
Back
: This returns to the main menu.
Checking the programming
When a departure time is activated and the
ignition is switched off the control lamp of the
fast heating button

lights up for approxi-
mately 10 seconds.
WARNING
Never programme the auxiliary heater so
that it switches itself on and is running in an
enclosed space or an area with no ventila-
tion. The auxiliary heater exhaust fumes
contain carbon monoxide, an odourless
and colourless toxic gas. Carbon monoxide
can cause people to lose consciousness. It
can also cause death.
Usage instructions
The auxiliary heater exhaust system located
below the vehicle must be kept clear of snow,
168