Seat 300 MP3, Руководство пользователя

Страница: 5 / 49

Quick Reference Guide 4
•
The rotary/push knobs have breaking points to reduce the risk of injury in
the event of an accident. For this reason, you should not press hard on the
buttons. Risk of damage. Light pressure is sufficient to operate the unit.
Note
The images that appear in the manual may differ from those of your equip-
ment, depending on the model and version.
Switching on and off
Switching on/off
– Push the ON/OFF button
⇒
page 2, fig. 1 .
Enter the PIN
– After turning on the equipment, if the screen displays INTROD.
PIN
⇒
fig. 2 , the pin must be entered. This may be found on the
equipment card.
– Select a digit by rotating the menu button
⇒
page 2, fig. 1
and confirm by pressing the button.
– Incorrect entries may be corrected using the function buttons
“Back”
⇒
fig. 2 , “Forward”
and
.
– After entering the 4 digit code, OK appears on the screen. If
the entered code corresponds to that on the card, confirm with
the menu button.
Fig. 2 Entering the PIN
A
3
A
1
A
B
A
C
ERASE
A
A
A
D
Radionaveg300_angles Seite 4 Donnerstag, 13. Oktober 2005 11:48 11