Seat 300 MP3, Руководство пользователя

Страница: 27 / 49

Navigation 26
– To enter stages, route lists, route options and blocked sections
⇒
page 29, “Route options”
– Displays the vehicle position. The actual vehicle position is
displayed as an address (if the location is on the navigation CD) and coordi-
nates. The direction of travel is indicated using a compass on the left hand
side of the screen. The SETUP menu may be used to manually enter the
vehicle position
⇒
page 35. While the destination guide is working, visual
indications will be given using symbols
⇒
page 40.
– Starts destination guide to the indicated destination. The
guide may be stopped using the function
⇒
page 37, “Destina-
tion guide”.
Function buttons used to enter numbers and figures
– To erase the character to the right hand side of the screen (only acti-
vated after entering characters).
– Shows a list from which the destination may be selected.
button on the NAVIGATION menu
More options are available in the Navigation setup menu
⇒
page 35.
Note
•
If the destination is changed while the guide is being used, you will be
asked if you wish to substitute the actual destination or to indicate a stage. If
a stage is added, route planning is automatically selected
⇒
page 27.
•
A mark may be displayed under certain letters. If these letters are marked
then, after a few seconds, special related symbols will appear (see also
⇒
page 32, fig. 18 ).
•
The entries between square brackets [ ... ] can neither be selected or
edited; insufficient data may have been entered. In the case of address, for
example, the country must first be entered followed by the town then finally
the address.
ROUTE
SYMBOLS
START GUIDE
END GUIDE
ERASE
LIST / OK
SETUP
Radionaveg300_angles Seite 26 Donnerstag, 13. Oktober 2005 11:48 11