Seat 2007 Cordoba, Руководство пользователя, Страница: 58 / 258

Cockpit 56
The multi-function system uses two automatic memories: 1 - Actual
memory
and
2 - Total memory
. The selected memory will be shown
in the upper right-hand corner of the display.
Selecting memory
– With the ignition switched on, briefly press the button
⇒
page 55, fig. 35 on the windscreen wiper lever to move
between the two memories.
Resetting the memory
– Select the memory that you would like to reset.
– Press and hold button on the windscreen wiper lever for at
least 2 seconds.
The trip memory 1 collects the travel and consumption data from the moment
the ignition is switched on until it is switched off. If the journey is continued
within two hours of switching off the ignition, the new values will be added to
the existing trip recorder memory. The memory will automatically be deleted
if the journey is interrupted for more than two hours.
The total journey memory 2 collects the journey data for any number of indi-
vidual journeys (even if the ignition is switched off for longer than two hours)
up to a total of 99 hours and 59 minutes travel time, 9999 miles distance trav-
elled and 999 litres of fuel consumed. The memory will automatically be
deleted if one of the named values is reached.
Displays in the multi-function display (MFD)*
You can switch between the following displays in the multi-function display
(MFD) by operating the rocker switch
⇒
fig. 37 on the windscreen wiper
lever.
A
A
A
A
Fig. 37 Windscreen wiper
and windscreen wash
lever: button A and rocker
switch B
Fig. 38 Digital instru-
ment panel display:
outside temperature
display.
A
B