Seat 2007 Cordoba, Руководство пользователя, Страница: 143 / 258

Driving 141
Safety First Operating instructions Tips and Maintenance Technical Data
Adjusting set speed*
The speed can be altered without touching the accelerator or
the brake.
Setting a higher speed
– Press the upper part RES of the rocker switch
⇒
fig. 104 to
increase the speed. The vehicle will continue to accelerate for as
long as you keep the rocker switch pressed. When you release
the switch, the new speed is stored.
Setting a lower speed
– Press the lower part SET– of the rocker switch to reduce the
speed. The vehicle will automatically reduce its speed for as long
as you keep the switch pressed. When you release the switch, the
new speed is stored.
When you increase speed with the accelerator and then release the pedal, the
system will automatically restore the set speed. This will not be the case,
however, if the vehicle speed is more than 10 km/h higher than the stored
speed for longer than 5 minutes. The speed will have to be stored again.
Control of the set speed is switched off if you reduce speed by depressing the
brake pedal. Reactivate the control by pressing once on the upper part of the
rocker switch
RES+
⇒
fig. 104 .
WARNING
It is dangerous to use a set speed which is too high for the current road,
traffic or weather conditions. Risk of accident.
Switching off system temporarily*
The cruise control system will be switched off in the following situations:
•
if the brake pedal is depressed,
Fig. 104 Turn signal and
main beam headlight
lever switch and rocker
switch for the cruise
control
A
B
A
A
A
B
Fig. 105 Turn signal and
main beam headlight
lever switch and rocker
switch for the cruise
control