installed from the CD or it can be downloaded from
www.seasoft.hu
. Installing the gate controller
module
driver
the
serial port
configuration. It starts by clicking
the
Set Port
button. Windows
registers the device and assigns it
to a COM-xx port. The software
indicates
module
version
and
enters configuration mode. The
user can configure
MobilGate-128
controller freely in configuration
mode. If the software cannot find
the port of the device indicated on
the picture, it has to be identified
manually
in
Windows
by
the
followings:
-> Control Panel -> System -> Hardware -> Devices -> Ports
The GSM device has to be identified by which serial port from
Com1...Com99
it is connected to.
Manual configuration is necessary when previously
a lot of USB devices had been connected on the
computer. In this case the device might not be in the
range of
Com1..99
Start the software then set the
Com value in
Settings
->
Port configuration
menu. The download software of
MobilGate-128d
offers a fast and simple way to configure the device.
Menus appearing on the screen allows the access to
the most important functions. Not only down-
loading the configuration into the device is possible,
but also the actual configuration can be readrom
gate controller. If the data has been modified
since the last download i.e. by SMSs, it can
be read and checked. It is advised to always
start
configuration
with
a
file
named
Default.mob. It is easier to edit uploaded data
without making any mistake than creating
new values. It is important to fill out the
required fields and avoid the use of accented
characters for names and commands because
the module does not recognize accented
characters. Fill the phone numbers in inter-
national format without the
‘
+
’
sign! Loading
data into the device can be started by clicking
the green
Dowload into Device
button.
SeaSoft Ltd.
www.seasoft.hu - www.mobil-control.eu T: (+36) 62 406405 M: (+36) 30 2557688 F: (+36) 62 405-969
