SEAS KingRO4Y MK.III, Инструкция по сборке

Страница: 12 / 12

12
Once the presets are loaded , in the “ Preset Settings ” section of the main dialogue box click the “ EQ ”
button and a screen will load like above, here it is necessary to add a ShelfLo- the details can be
copied from the image above. These need to be uploaded to the DSP and this process repeated for
each preset.
Lastly there are the “ Device Settings ”, wher e there are options for adding a limiter, input gain
settings, amplifier configuration etc.
The settings in the figure below can be copied for ease but you may want to customise some of the
power settings
. Please note that you should select “ left ” or “ right ” for the corresponding speaker in
“ Digital Audio Channel Select ” of this window.
There is a limiter in place which can be seen in the figure below, to activate this, please ensure you
check “ soft-clip enabled ” in the “ Options ” section of this window.
After this you should be all set to test out your newly build speakers.