Sears Craftsman 944.601131 страница 8 Скачать руководство пользователя | Manualshive

Страница: 8 / 56

background image

8

ASSEMBLY

3

CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC-
TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE
BEST PERFORMANCE AND SATISFACTION FROM THIS
QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

3

All assembly instructions have been completed.

3

No remaining loose parts in carton.

3

Battery is properly prepared and charged. (Minimum 1
hour at 6 amps).

3

Seat is adjusted comfortably and tightened securely.

3

All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).

3

Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).

3

Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.

3

Check wiring. See that all connections are still secure
and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:

3

Engine oil is at proper level.

3

Fuel tank is filled with fresh, clean, regular unleaded
gasoline.

3

Become familiar with all controls - their location and
function. Operate them before you start the engine.

3

Be sure brake system is in safe operating condition.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for
shipping purposes. Correct tire pressure is important for
best cutting performance.
•

Reduce tire pressure to PSI shown in “PRODUCT
SPECIFICATIONS” section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower housing should be properly
leveled. See “TO LEVEL MOWER HOUSING” in the Service
and Adjustments section of this manual.

CHECK FOR PROPER POSITION OF ALL
BELTS

See the figures that are shown for replacing motion and
mower blade drive belts in the Service and Adjustments
section of this manual. Verify that the belts are routed
correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your tractor, check to see that
the brake is properly adjusted. See “TO ADJUST BRAKE”
in the Service and Adjustments section of this manual.

TO DRIVE TRACTOR OFF SKID (See Opera-
tion section, page 10, for location and func-
tion of controls)

WARNING:

Before starting, read, understand and follow

all instructions in the Operation section of this manual. Be
sure tractor is in a well-ventilated area. Be sure the area in
front of tractor is clear of other people and objects.
•

Be sure all the above assembly steps have been
completed.

•

Check engine oil level and fill fuel tank with gasoline.

•

Sit on seat in operating position, depress clutch/brake
pedal and set the parking brake.

•

Place gear shift lever in neutral (N) position.

•

Press lift lever plunger and raise attachment lift lever to
its highest position.

•

Start the engine. After engine has started, move throttle
control to idle position.

•

Depress clutch/brake pedal into full "BRAKE" position
and hold. Move gearshift lever to 1st gear.

•

Slowly release clutch/brake pedal and slowly drive
tractor off skid.

•

Apply brake to stop tractor, set parking brake and place
gearshift lever in neutral position.

•

Turn ignition key to "OFF" position.

Continue with the instructions that follow.

«
...
6
7
8
9
10
...
»

Содержание Craftsman 944.601131

























































Отзывы:

Нет отзывов

Похожие инструкции для Craftsman 944.601131

Бренд: Jacobsen Страницы: 46

Бренд: Jacobsen Страницы: 70

Бренд: Jacobsen Страницы: 26

Бренд: Jacobsen Страницы: 247

Greens King V Plus

Бренд: Jacobsen Страницы: 94

Groom Master II

Бренд: Jacobsen Страницы: 104

Бренд: Jacobsen Страницы: 144

Бренд: Nakayama Страницы: 12

Бренд: Cobra Страницы: 19

Greens King IV 62287

Бренд: Jacobsen Страницы: 138

Бренд: Sabo Страницы: 92

Бренд: Parker Страницы: 25

Бренд: Yard-Man Страницы: 4

Бренд: Snapper Страницы: 28

Patriot FDR1660

Бренд: Land Pride Страницы: 2

Бренд: MTD Страницы: 16

Бренд: Cub Cadet Страницы: 48

Commercial Front Cut Rider YHRLD211

Бренд: Yazoo Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды