Sears Craftsman 107.250040, Руководство оператора, Страница: 17 / 120

Attaching a Trailer
The maximum horizontal drawbar force allowed 444 Newton.
The maximum vertical drawbar force is 222 Newton. This
equates to a 396 lbs (180 kg) trailer on a 10 degree hill.
Secure the trailer with an appropriately sized clevis pin ( A ,
Figure 9) and clip ( B ).
Adjusting Mower Cutting Height
The cutting height is adjustable between 1.5” and 4.0” (3,8
and 10,2 cm).
The cutting height adjustment switch (
A , Figure 8) controls
the mower cutting height. This same switch also controls
the spout rotator motor when a snowthrower is installed.
The arrows on the switch correspond to the direction of
adjustment (UP arrow raises cutting height, RIGHT arrow
rotates the spout right, etc). When the adjustment indicator
has reached the end of its travel, release the switch; holding
the switch down will damage the motor. A
B
Figure 8
Figure 9
17
en
Figure 10
Cut Height Cut Heigh
t
4
3
2
1
1
A
Cut Height Cut Heigh
t
4
3
2
1
1
Seat Adjustment
Seat Slide Adjustment
The seat can also be adjusted forward and back. Move
the lever ( A , Figure 10), position the seat as desired, and
release the lever to lock the seat into position.
Seat Spring Adjustment
The seat springs can be adjusted to provide a softer or firmer
ride. Tilt the seat forward and slide the spring assembly
forward for a softer ride, and back for a firmer ride.
A
Not
for
Reproduction