Sears Craftsman 107.250040 Скачать руководство пользователя страница 16

Attachment Operation in Reverse

If an operator chooses to operate a PTO driven attachment 

in reverse, the RMO system can be used. To use the 

Reverse Mowing Option (RMO) turn the RMO key after 

the PTO is engaged. The L.E.D. light will illuminate, and 

the operator can then operate the attachment in reverse. 

Each time the PTO is disengaged the RMO needs to be 

reactivated if desired. The key should be removed to restrict 

access to the RMO feature.

Pushing the Tractor by Hand

 1.  Disengage the PTO and turn the engine off.
 2.  Pull the transmission release (

B

, Figure 7) back 

approximately 2-1/2” (6 cm) to lock into released position.

 3.  The tractor can now be pushed by hand. 

Mowing in Reverse 

(

RMO

)

If an operator chooses to mow in reverse, the RMO system 

can be used. To use the Reverse Mowing Option (RMO) turn 

the RMO key after the PTO is engaged. The L.E.D. light will 

illuminate, and the operator can then mow in reverse. Each 

time the PTO is engaged the RMO needs to be reactivated if 

desired. The key should be removed to restrict access to the 

RMO feature.

DO NOT TOW TRACTOR

Towing the unit will cause transmission 

damage. • Do not use another vehicle to 

push or pull this unit. • Do not actuate the 

transmission release valve lever while the 

engine is running.  

Stopping the Tractor and Engine

        

1.   Move the throttle control to the SLOW position. 
2.   Turn the key switch to the OFF position. 
3.   Remove the key and keep in a safe place out of the 

reach of children.

WARNING

Fuel and its vapors are extremely  

 

flammable and explosive.
Fire or explosion can cause severe burns  

or death

Figure 7

16

 

Cut Heigh

t

4

3

2

B

A

  

WARNING

The engine will shut off if the reverse ground speed 

pedal is depressed while the PTO is on and the 

RMO has not been activated. The operator should 

always turn the PTO off prior to driving across 

on roads, paths or any area that maybe used by 

other vehicles. Sudden loss of drive could create a 

hazard.

 

WARNING

Mowing in reverse can be hazardous to bystanders. 

Tragic accidents can occur if the operator is not 

alert to the presence of children. Never activate 

RMO if children are present. Children are often 

attracted to the unit and the mowing activity.

Not 

for  

Reproduction

Содержание Craftsman 107.250040

























































































































Отзывы: