Sears 30727 Скачать руководство пользователя | Manualshive

Страница: 8 / 45

background image

8

| 008 Sears CA Treadmill Service Manual [rev 1.0]

Section One |

Maintenance

Maintenance

>>

Treadmill Preventative Maintenance Procedures

Cleanliness of your treadmill and its operation environment will keep maintenance problems and service
calls to a minimum. For this reason, we recommend that the following preventive maintenance schedule
be followed.

AFTER EACH USE (DAILY)
Clean and inspect, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use
solvents, as they can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become
pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage
any other components on the treadmill by being misaligned.

EVERY WEEK
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
treadmill.
• Return the treadmill to its previous position.

EVERY MONTH - IMPORTANT!
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Inspect all assembly bolts of the machine for proper tightness.
• Turn off the treadmill and wait 60 seconds.
• Remove the motor cover. Wait until ALL LED lights turn off.
• Clean the motor and lower board area to eliminate any lint or dust particles that may have
accumulated. Failure to do so may result in premature failure of key electrical components.
• Vacuum and wipe down the belt with a damp cloth. Vacuum any black/white particles that may
accumulate around the unit. These particles may accumulate from normal treadmill use.

Note: Maintenance is NOT covered under manufacturer’s warranty.

«
...
6
7
8
9
10
...
»

Содержание 30727














































Отзывы:

Нет отзывов

Похожие инструкции для 30727

Бренд: Land Страницы: 14

Бренд: CYBEX Страницы: 70

Бренд: Xterra Страницы: 24

Бренд: Xterra Страницы: 24

Бренд: Smooth Fitness Страницы: 23

Бренд: Smooth Fitness Страницы: 34

Бренд: Smooth Fitness Страницы: 46

Бренд: Pro-Form Страницы: 36

Бренд: Dyaco Страницы: 90

Бренд: fitness gear Страницы: 28

York Pacer 4700

Бренд: York Fitness Страницы: 30

YORK PACER 480 HRC

Бренд: York Fitness Страницы: 32

INCLINE TRAINER X3 INTERACTIVE

Бренд: Freemotion Страницы: 32

Бренд: True Fitness Страницы: 2

Бренд: Vision Fitness Страницы: 24

Бренд: GaitKeeper Страницы: 29

Staminatreadmill

Бренд: York Fitness Страницы: 24

NordicTrack T 12.0

Бренд: ICON Health & Fitness Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды