3 |
P a g e
Diagram #1
Diagram #2
A S S E M B LY I N S T R U C T I O N S
a
B
C
C
B
C
B
1. Place a leg frame (B) upside down on a non-abrasive surface such as carpet. Attach two
crossbars (C) to the leg frame (B) by inserting the crossbar into the holes on the leg frame
(B) as pictured (a) &
use wood glue (6) to secure crossbars (C) to the leg frames (B)
.
Note:
The small holes on the bottom of the crossbars must face the bottom
of the stool.
2. Repeat the same above steps by attaching the second leg frame to the crossbar as shown.
a
b
c
C
C
B
B
A
3. Place seat cushion (A) upside down on a non-abrasive
surface such as carpet. Attach leg frames (B) to the seat
cushion (A) by inserting the wood dowels on the top of
leg frame into the holes on the bottom of seat cushion as
pictured (a) &
Use wood glue (6) to secure the wood
dowels to the seat top
.
4. Secure the leg frame to the seat cushion using four allen
bolts (1), four flat washers (2) and four spring washers
(3) as pictured (b). Tightly fasten the allen bolts with allen
wrench (5)
5. Secure the crossbars (C) to the leg frames (B) using four
screws (4) as pictured (c). Tightly fasten the screw with
Phillips screw driver (not included).
6. Turn stool upright. The Padded Saddle Stool is now
ready for use.
a&b
c
B
A
A
B
5
1
3
2
4
C
B
Wood Dowel
