manualshive.com logo in svg

Seanix Gatineau, Справочное руководство, Страница: 11 / 54

Поделиться
Скачать
Seanix Gatineau Скачать руководство пользователя страница 11

11

•

  Power management functions

Support for system suspend/resume (DRAM and power-on suspend)

Compliant with ACPI power management

•

  SMBus support for desktop management functions

•

  Support for system management mode (SMM)

Intel 82371EB PCI ISA IDE Xcelerator (PIIX4E)

The PIIX4 is a multifunction PCI device implementing the PCI-to-ISA bridge, PCI IDE
functionality, Universal Serial Bus (USB) host/hub function, and enhanced power
management. The PIIX4E comes in a 324-pin package that features:

•

  Multifunction PCI-to-ISA bridge

Support for the PCI bus at 33 MHz

Complies with the PCI specification (see Section 6.2 for specification information)

Full ISA bus support

•

 USB 

controller

Two USB ports (see Section 6.2 for specification information)

Support for legacy keyboard and mouse

Support for UHCI interface (see Section 6.2 for specification information)

•

  Integrated dual-channel enhanced IDE interface

Support for up to four IDE devices

PIO Mode 4 transfers at up to 16 MB/sec

Support for Ultra DMA/33 synchronous DMA mode transfers up to 33 MB/sec

Bus master mode with an 8 x 32-bit buffer for bus master PCI IDE burst transfers

•

  Enhanced DMA controller

Two 8237-based DMA controllers

Support for PCI DMA with three PC/PCI channels and distributed DMA protocols

•

  Interrupt controller based on 82C59

Support for 15 interrupts

Programmable for edge/level sensitivity

•

  Power management logic

Sleep/resume logic

Support for wake-on-modem, Wake on LAN technology, and wake on PME

Support for ACPI (see Section 6.2 for specification information)

•

 Real-time 

Clock

Содержание Gatineau























































Отзывы:

Нет отзывов