7
WIRING AND BATTERY
Route the trolling motor wires on the
opposite side of the boat from other
boat wiring. Sensitive electronics, such
as depth finders, should be connected
directly to the main engine battery.
Single battery system requires
separate connection cables.
BATTERY
12V Model: 1x 12V 105AH (Group 27) deep cycle marine battery suggested
24V Model: 2x 12V 105AH (Group 27) deep cycle marine battery suggested
To extend the running time, use a larger capacity battery or an additional battery. As a general rule, deep cycle
batteries with a higher Amp
‑
hour rating or reserve capacity rating provides a longer run time and better performance.
Do not power any depth sounders or fish finders from the trolling motor battery. Connecting electronic equipment to
the trolling motor batteries can cause electrical interference. Any depth sounders or fish finders must be powered
from the starting engine or accessory battery.
For better overall performance, it is recommended to fully charge the batteries after each use. Disconnect the
batteries from the motor before charging. Frequently charge the batteries to capacity to keep them in good condition.
12V DC
BATTERY
CONNECTION
24V DC
BATTERY
CONNECTION
Black cable (
-
ve)
from the Motor
Red cable (+ve)
from the Motor
12V DC
DEEP CYCLE
