manualshive.com logo in svg

Seamaty SMT-120V, Руководство пользователя

Поделиться
Скачать
Seamaty SMT-120V Скачать руководство пользователя страница 4

 P/N: E00SMT120VCO

 Version

：

A/0

 3

Good to Know

Dear customers:

Thank you for your trust and using SMT-120V fully automated veterinary chemistry analyzer. In 
order to let you have a comprehensive understanding of this analyzer, we provide this manual 
for you with contents including introduction, usage, maintenance, packing, storage, 
transportation, etc. To ensure the good operation of analyzer and the reliability and accuracy of 
test results, please pay a lot attention on the "WARNING", "CAUTION" and "Note" in this 
manual.

Note: Use this manual appropriately

Scope of application:

 

 User who received the operation training from Seamaty

1)

 

 

User who received the operation training from authorized distributors of Seamaty

2)

We do our best to provide correct and reliable information in this manual, but it is inevitable to 
have mistakes or omission. If you have any doubts, please kindly contact us to specify them. 
Contact information has been provided in the last page of this manual. 
In order to improve the performance and reliability of the analyzer, we will make some real-time 
changes to the hardware or software, which may lead to the difference from this manual. 
Seamaty reserves the right to revise this manual and software version without notice!
No person or organization may reproduce, modify or translate the contents of the instructions 
without the written consent of Seamaty.
Seamaty has the final interpretation of the contents of this manual.
The illustrations used in this manual are showing as samples, which may differ from the actual.
Be sure to use the analyzer under the conditions specified in this manual. Failure to do so may 
result in failure of analyzer or unreliability of test results.

Instructions

Содержание SMT-120V














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды