manualshive.com logo in svg

Seamaty SMT-120V, Руководство пользователя

Поделиться
Скачать
Seamaty SMT-120V Скачать руководство пользователя страница 12

 P/N: E00SMT120VCO

 Version

：

A/0

 11

Section

 

2 

  

Installation of Analyzer 

 

2.1

 Unpacking

Unpack the carton case and check with Packing List, and prepare to install the analyzer if 
everything is right. If you have any questions, please contact with our after-sales service team. 
Meanwhile, please write the guarantee and send it back, which is convenient for us to follow 
and track your service. (If send email, please email to: [email protected])

Instrument work environment :  Temperature: 10-32 

℃

, 

                           

             

Relative Humidity ≤85%

Note

Do not place the device in following environment :

 

 

Humidity, corrosive gas, dusty, strong electromagnetic interference; 

1)

 

Crowd and non-aeration; 

2) 

 

 

Non-steady worktable;

3)

 

Direct sunlight.

4) 

Requirements for power supply:

AC100-240V, 50-60Hz,

            

, 105W Max

The analyzer can not use the same power supply socket with some high-power 
equipment including centrifugal, refrigerator, and oven, etc.
The power supply should be connected with three-cores wire and and good grounding ; 

the voltage between the neutral line and earth line

＜

5V; or choose two core power cord 

with power adapter provided by Seamaty.

 

2.2 Installation Procedure

 2.2.1 Set up analyzer

1) 

 

Remove the analyzer from the shipping carton case and place in a stable worktable

 

Check if the exterior case of analyzer is intact

2) 
3) 

 

Plug the power jack into the analyzer, then plug the detachable power supply cord 

   

into the power adapter and into a grounded electrical outlet.

 

Turn on the switch on the back of analyzer, indicator light on, the display will show

4) 

   

the home screen. 

Please keep safe of accessories have not been used.

Instructions

Содержание SMT-120V














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды