> Installation
A step by step assistance
Recommendations
Before any installation,
it is important to provide a 1’’1/2 vacuum fitting compatible with the
screwing method.
Be sure that the wall inlet corresponds to the type of pool structure and does
not leak.
Do not use in an above ground or freestanding pool.
The wall inlet must be connected to a junction box by a waterproof conduit. The cable must pass
through the conduit and connect to a
~12V
power supply in a connection box
fed by
a safety
isolating transformer
with a power higher by at least 20% to the total of all connected projectors.
Using other types of transformer is prohibited. It is important to tighten the back gland nut
otherwise it may cause irreversible damages.
Handle the projectors with care and on a clean cloth support.
