SealMaster CRACK PRO 125 Скачать руководство пользователя страница 11

Страница: 11 / 74

SAFETY PRECAUTIONS AND CAUTIONS

DRESS FOR SAFETY

When operating your Crack Pro equipment always wear the following:

Long pants

Long sleeved shirt

Heat resistant gloves

Eye protection (face shield is preferred)

Work shoes

Safety Vest

WARNING:

MOVING PARTS



Keep hands, feet, hair, and clothing away from all moving parts.



Never operate the machine with covers, shrouds, or guards removed.



Do not wear loose or dangling clothing or jewelry near the
equipment. It could become caught and possibly cause serious injury
or death.

LEARN TO BE SAFE

STUDY THE OPERATORS MANUAL

and other pertinent information

furnished with the equipment. Learn your machines operating and
maintenance characteristics, capacities, and limitations.

Learn the location and function of all controls, indicators, and
warning devices.

Be familiar with the safety devices on your machine.

Learn to recognize the machines warning and safety signals, they will
alert you to conditions that may make it hazardous to continue
operating.

Carefully read and follow all safety signs and instructions on the
machine.

Keep safety signs and instructions in good condition, replace missing
or damaged signs immediately.

Do not open the tank lid and put your head directly over the opening.
Besides not being good to breathe, there may be enough oxygen
introduced into the tank to cause the sealant to self-ignite.

Содержание CRACK PRO 125











































































Результаты поиска

Содержание CRACK PRO 125

Отзывы:

Похожие инструкции для CRACK PRO 125

Бренды по названию

Популярные бренды

SealMaster CRACK PRO 125, Руководство пользователя

Результаты поиска

Содержание CRACK PRO 125

Отзывы:

Похожие инструкции для CRACK PRO 125

Бренды по названию

Популярные бренды