Latest products and information available at www.sealite.com
14
SL-70
2–3NM+ Solar Marine Lantern
Intensity/power settings on Sealite lanterns operate via DIP switches, located near the rotary switches on
the flasher unit. The intensity/power settings may be used to reduce the power consumption and intensity
of the lantern. Setting the lantern to 25% intensity will reduce the power consumption to 25% of the normal
100% setting and the range by 20% - 40% depending on the maximum intensity. Refer to Sealite power
calculator to confirm reduced range. This setting may be used to adjust the current draw of the light to
local sunlight conditions.
The following diagrams indicate intensity/power settings:-
All lanterns have 2 rotary switches marked A and B on the flasher unit. Turning the small arrows to the
appropriate number or letter will set the code. The unit will respond within 30 seconds to activate a new
flash code. A comprehensive list of available flash codes is listed on in the ‘Flash Codes’ section of this
manual.
Example:
100%
1 2
ON
75%
1 2
ON
50%
1 2
ON
25%
1 2
ON
4
5
6 7
8 9 A
B
C
D
EF0
12
3
4
5
6 7
8 9 A
B
C
D
EF0
12
3
A
B
SWITCH FLASH CODE
ON
OFF
A
B
A
0 FL 3 S
0.3
2.7
Selecting an Intensity/Power Setting
Selecting a Flash Code - Rotary Switches A & B
