SEALINE S28, Руководство пользователя

Страница: 20 / 61

Sealine International Ltd. (V1.1)
Page 20 of 61
WARNING
WARNING
Engines and Ancillary Equipment
Propeller Installation
IMPORTANT : Correct rotation propeller MUST match direction of rotation of propeller shaft.
Be sure that the remote control is in neutral position and ignition key is removed from switch prior to installing the
propeller.
Place a block of wood between the anti-ventilation plate and propeller to protect hands from propeller blades and to
prevent the propeller from turning when tightening propeller nut.
Stern Drives
IMPORTANT: Installation is correct when at least 2 threads of propeller shaft are exposed through the
propeller nut after applying the torque required.
Install the propeller with attaching hardware as shown. Tighten nut until a minimum of 55lb. ft. (75 N-m) is attained;
then, continue to tighten until the 3 tabs on the tab washer align with the grooves on the spline washer. Bend the 3
tabs down into the grooves.
a - Apply lubricant on splines of propeller shaft
b - Forward thrust hub
c - Propeller
d - Continuity/spline washer
e - Tab washer
f - Locknut
Volvo Single Prop.
Volvo Duo Prop.
Duo prop has two counter rotating propellers and is claimed to give up to 15% greater thrust. This means better
acceleration and higher top speed.
NOTE: Small nicks or bends in the propeller blades will greatly reduce performance.