Sealife SL400, Инструкция по эксплуатации

Страница: 45 / 52

44
•
Do not use any household cleaners, soaps, detergents, or chemicals to clean the underwater housing.
Chemicals may cause negative reaction with the plastic materials.
•
Replace O-ring every year to ensure proper seal. Only use the official SeaLife O-rings designed for the
SportDiver underwater housing (Item # SL40010)). Replacement O-rings are available at your local
authorized SeaLife dealer, or online at www.sealifepartsdirect.com (USA Only).
•
Do not expose the housing to direct sunlight for prolonged periods of time. Keep housing in a shaded area
or under a towel to prevent it from overheating.
•
Do not disassemble or attempt to repair the housing as this will void your warranty. Contact your local
authorized SeaLife dealer or the SeaLife Service Center in your country for repairs.
•
Use the included lanyard to strap the underwater housing to your wrist or clip the housing to your BCD
(buoyancy control device).
•
Do not let any moisture or dirt get inside housing when opening. This may result in fogging when using the
camera underwater.
•
Avoid opening housing in wet, sandy, or humid environments. It is recommended to open and load the
housing in dry cool air, such as inside an air-conditioned room. This will prevent water or humidity from
being trapped inside the housing, which may cause fogging during underwater use.
•
Store housing at room temperature in a clean and dry place.