Fig.4
Original Language Version
YK209F.V2 Issue: 1 - 05/07/13
© Jack Sealey Limited
Страница 1: ...ss if any parts are missing as this may cause failure or possible personal injury DO NOT use to compress springs or any other item that could disengage and cause a potential hazard DO NOT stand directly in front of the loaded press and never leave a loaded press unattended DO NOT force the press to achieve a task it was not designed to perform DO NOT make any modifications to the press DO NOT adju...
Страница 2: ...the frame uprights using bolt 2 washer 4 lock washer 5 and nut 6 Refer to fig 1 3 1 3 Move the pump assembly to the outside of the post secure using bolt 37 and washer 4 which held the pump to the inside of the post during transit Refer to fig 2 3 1 4 Assemble the gauge fitting 31 the nylon ring 32 which fits between the gauge and the gauge fitting see fig 4 and the gauge 33 Twist the gauge as tig...
Страница 3: ...Fig 4 Original Language Version YK209F V2 Issue 1 05 07 13 Jack Sealey Limited ...
Страница 4: ...S 4 2 1 Check that the release valve on the hydraulic unit is fully closed ready for operation 4 2 2 Locate the flat pressing plates or the v blocks on to the bed frame push down the locating pins to ensure the plates do not slip Place workpiece onto the plates and position the head of the hydraulic unit on the centre of the workpiece using an appropriate extension Note Care must be taken to ensur...