background image

YK15FFP.V2  Issue 1 14/03/22

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call 
our technical team on [email protected] or 01284 757505.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 24 months from purchase date, proof of which is required for any claim.

Содержание YK15FFP.V2

Страница 1: ...xceed the rated capacity of the press DO NOT apply off centre loads DO NOT allow the workpiece or the press plates to fall from the work table DO NOT get the press wet or use in damp or wet locations or areas where there is condensation DO NOT operate the press when you are tired or under the influence of alcohol drugs or intoxicating medication DO NOT climb upon the press DO NOT use to compress a...

Страница 2: ...lat level floor level the frame using a good quality spirit level Fully tighten all fixings 4 2 8 Remove the load slings and store them in a safe and secure location WARNING Take care and seek assistance from another person when lowering and levelling the frame assembly onto the floor 4 3 ATTACH PUMP AND FOOT PEDAL ASSEMBLY NOTE The pump 44 foot pedal 47 protective housing 51 washer 12 and bolt 16...

Страница 3: ...d align beneath the ram as required NOTE Care must be taken to ensure a V block does not fall from the press table If necessary hold the configuration in position with clamps not supplied WARNING DO NOT apply off centre loads 6 4 Rotate the speed control valve clockwise located on the right hand side of the protective housing for pump 51 to the Quick Speed position to lower the ram head rapidly un...

Страница 4: ...pletely unserviceable and requires disposal drain any fluids if applicable into approved containers and dispose of the product and fluids according to local regulations Note It is our policy to continually improve products and as such we reserve the right to alter data specifications and component parts without prior notice Please note that other versions of this product are available If you requi...

Отзывы: