Sealey WPCD215 Скачать руководство пользователя страница 4

Original Language Version

© Jack Sealey Limited

WPCD215    Issue 2 (3,F)    26/10/21

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior 

notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment 
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid 

waste authority for recycling information.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Содержание WPCD215

Страница 1: ...at the cable outer sheath extends inside the cable restraint and that the restraint is tight Sealey recommend that repairs are carried out by a qualified electrician 1 6 GENERAL SAFETY WARNING Pump must be used in accordance with Health Safety government local authority and water authority rules and regulations 9 Familiarise yourself with application and limitations as well as the specific potenti...

Страница 2: ...ose screw a suitable hose adaptor onto the pressure connection Push the hose firmly onto the hose adaptor and secure with a hose clamp 4 1 3 Installation 4 1 3 1 The pump needs an area of at least 50 x 50cm the float switch must be able to move freely so that it functions properly 4 1 3 2 The pump can be submerged under water to the submerged operating depth of 7metres 4 1 3 3 Install the pump so ...

Страница 3: ...ll accessible parts of the inside of the casing Remove fibres which have wound round the rotor shaft by opening the pressure connection Remove stubborn contamination with a brush and detergent NOTE Before using the pump again first soak it so that any possible dirt residues do not block the pump 5 STORAGE 5 1 If there is a risk of frost dismantle the pump and accessories clean and store them in a ...

Страница 4: ...TIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment WEEE When the product is no longer required it must be disposed of in an environmentally protective way Contact your local solid waste authority for recycling information ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste...

Отзывы: