Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9
Keep children and unauthorised persons away from the work area.
9
Keep work area clean and tidy and free from unrelated materials.
9
Ensure the work area has adequate lighting.
8
DO NOT
touch the probe whilst switched on, it will be hot.
8
DO NOT
use the tester to perform a task for which it is not designed.
8
DO NOT
allow untrained persons to use the tester.
8
DO NOT
use whilst under the influence of drugs, alcohol or intoxicating medication.
9
After use, clean equipment and store in a cool, dry, childproof area.
1.1.
BRAKE FLUID SAFETY
9
Always read and comply with the warnings on the brake fluid manufacturer’s container.
9
Wear eye protection and keep skin contact to a minimum. If brake fluid enters eyes rinse with plenty of water and seek medical advice.
If swallowed seek medical advice immediately.
9
Dispose of waste brake fluid in accordance with local authority regulations.
WARNING!
Brake fluid will damage paintwork. Any spillage should be flushed with water immediately.
WARNING!
Brake fluid is flammable - keep away from sources of ignition, including hot surfaces e.g. exhaust manifold.
1.2.
PERSONAL PRECAUTIONS (WORKING WITH BATTERIES)
9
Ensure there is another person within hearing range, or close enough to come to your aid should a problem arise, when working near a
lead-acid battery.
9
Have fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.
9
Wear safety eye protection and protective clothing. Avoid touching eyes while working with a battery.
9
Wash immediately with soap and water if battery acid contacts skin or clothing. If acid enters eye, flush eye immediately with cool, clean
running water for at least 15 minutes and seek immediate medical attention.
9
Remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit current
high enough to weld a ring or the like to metal, which may cause severe burns.
2. INTRODUCTION
T
he approved method of testing the water content of brake fluid. Just 3% of moisture can lower the brake fluid boiling point by over 100°C. The best
way to detect this small water content is to measure the boiling point of the fluid. The unit incorporates a heater element.
LCD display and a power
lead for use on 12v DC power supplies. Works on DOT 3, 4, 5 and 5.1 specification fluids. Supplied in carry case with full operating instructions.
3. CONTENTS
InSTRuCTIOnS fOR
BRAKE FLUID BOIL TEST
mODeL nO:
VS0275
refer to
Instruction
manual
Wear eye
protection
Wear
p
rotective
g
loves
W
arning:
hot
S
urface
Original Language Version
© Jack Sealey Limited
v
S0275 | Issue:1 - 27/10/17
