VS862 - 2 - 151107
17
≤ V2.4 SOFTWARE
The DTC number will appear on the upper left hand corner and its
y
definition will show on the body of screen.
The type of code (Generic or Manufacturer specific), the vehicle
y
protocol, the sequence of the DTC currently being observed, the total
number of codes detected and the module ID will be observed on the
upper right hand corner of the display.
If the code being displayed is a pending code, the
y
Pd
icon will be
observed next to the DTC number on the upper right hand corner of
the display.
When a DTC’s definition covers more than one display screen, use the
y
Y
button, as necessary, to view any additional information.
If the retrieved DTCs contain any manufacturer specific or enhanced
y
codes, you will be prompted to refer to the CD DTC library or the
vehicle service manual to view the DTC definitions.
If more than one DTC is found, use the
10)
UP/DOWN
scroll buttons, as
necessary, until all the codes have been shown up.
Erasing Codes
If you decide to erase the DTCs, use the
1)
UP/DOWN
scroll buttons to
select
Erase Codes
from the
OBDII/EOBD DIAG.
menu and press the
Y
button.
P0118
Pd 06/06
ISO9141
$09
↓
Pressure Control
Solenoid A Control
Circuit Low
OBDII/EOBD DIAG.
►1) Read Codes
2) Erase Codes
