VS862 - 2 - 151107
14
≤ V2.4 SOFTWARE
Readiness Test
Important: The Readiness Test function is used to check the operations of
the Emission System on OBD2/EOBD compliant vehicles. It is an excellent
function to use prior to having a vehicle inspected for compliance to an
emissions program.
“Pass” -- Indicates that a particular monitor being checked has completed
y
its diagnostic testing.
“Fail” -- Indicates that a particular monitor being checked has not
y
completed its diagnostic testing or the monitor is not supported on that
vehicle.
Use the
1)
UP/DOWN
scroll buttons to select
Readiness Test
from
Select
Function
menu and press the
Y
button.
If the scan tool is not connected yet, then refer to
y
Reading Codes
from
1 to 7 at Paragraph 3.1.
Use the
2)
UP/DOWN
scroll buttons, as necessary, to view the status of the
following monitors:
EGR Sys.-- EGR System Monitor.
y
O2 Sensor(s) -- O2 Sensors Monitor.
y
Catalyst -- Catalyst Monitor.
y
EVAP Sys. -- Evaporative System Monitor.
y
Heated O2 --O2 Sensor Heater Monitor.
y
Sec Air Inject -- Secondary Air Monitor.
y
A/C -- A/C system Monitor.
y
Catalytic Conv. -- Catalytic Convertor Monitor.
y
Select Function
1) Read Code
2) Erase Code
3) ECU Information
►4) Readiness Test
