background image

ELECTRONIC STARTER/

CHARGER 180AMPS 

12V/24V

MODEL NO:

 

TECSTART420.V2

NOTE:

 It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: 

No liability is accepted for incorrect use of this product. 

WARRANTY: 

Guarantee is 12 months from purchase date, proof of which will be required for any claim. 

INFORMATION:

 For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group, 

Kempson Way, Suffolk Business Park

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

Environmental Protection.

  

Recycle unwanted materials instead of disposing of them as waste. 

 

 

All tools, accessories and packaging should be sorted, taken to a recycle centre and  

 

 

disposed of in a manner which is compatible with the environment.

   When the product is no longer required, it must be disposed of in an environmentally  

 

 

protective way. Contact your local solid waste authority for recycling information.

  

Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are  

required to inform potential purchasers of products containing batteries (as defined within 

these regulations), that they are registered with Valpak’s registered compliance scheme. 

Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705

Original Language Version

TECSTART420.V2 Issue: 3(L) 

- 08/05/14

© Jack Sealey Limited

Содержание TECSTART420.V2







Отзывы: