sealey group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
environment protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Weee regulations
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
4.6.3.
Pressing the “Mem” button again for at least 1 second, the LCD display shows the memory number “P02” and then the torque value.
Repeat to cycle through all memory values (“P01” is the latest reading, “P50” is the oldest). The digital torque adaptor stores the last 50
torque value readings.
4.7.
turning adaptor off
4.7.1.
If the digital torque adaptor is not used for 70 seconds, it will automatically switch off, otherwise manually turn it off by pressing and
releasing the power button (fig.7).
5. maintenance
5.1.
batterY care and use
5.1.1.
Keep the batteries dry at all times.
8
do not
combine used batteries with new ones or mix battery types.
5.1.2.
Insert/remove the batteries carefully as described in Section 4.1.1.
5.1.3.
Never use a battery if it is cracked, broken or leaking.
5.1.4.
Never heat or incinerate batteries.
5.1.5.
See battery disposal information below.
5.1.6.
If the digital torque adaptor is not being used for a longer period of time, remove the batteries to prevent damage from leakage.
5.2.
calibration
5.2.1.
Periodic calibration is required for this product, contact your Sealey stockist for details.
5.2.2.
Use only a damp cloth for cleaning. Never use any type of liquid, aerosol cleaner, or any type of organic solvent.
Original Language Version
© Jack Sealey Limited
STW292.V2| Issue:1 20/08/18
batterY removal refer to 4.1.1.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
