•
11
•
PROBlEM
POSSIBlE CAUSE
SOlUTION
Green LED is flashing and
the display shows
CHArge
ABOrteD-BAD BAttery
.
The battery is too large for the
charger.
The battery voltage is still below
10V after 2 hours of charging.
You need a charger with a higher
amp rate.
Have the battery checked.
the display shows
COnneCt ClAMPS
.
the clamps are not making a good
connection.
The fuse is bad.
check for poor connection at
battery and frame.
replace the in-line fuse for the ring
connector.
18. SPECIFICATIONS
input .................................................................................................. 230V Ac~50Hz, 1.2A
output ................................................................................................................. 12V 6A
ingress Protection rating ..............................................................................................iP20
S
ole UK Distributor,
Sealey Group.
Kempson Way,
Suffolk Business Park,
Bury St. Edmunds, Suffolk.
iP32 7Ar
www.sealey.co.uk
01284 757500
01284 703534
Web
nOte:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications
and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 2 years from purchase date, proof of which will be required for any
claim.
Environmental Protection
recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment.
WEEE Regulations
Dispose of this product at the end of its working life in compliance with the Eu
Directive on Waste Electrical and Electronic Equipment (WEEE). When the
product is no longer required, it must be disposed of in an environmentally
protective way. contact your local solid waste authority for recycling information.
