4. operation
4.1.
Follow the instructions of the rust preventative fluid/underseal carefully. Ensure that the container is shaken before use.
4.2.
preparing gun for use.
4.2.1.
Pour the rust preventative into the canister (fig.3) and securely screw the gun top onto canister.
4.2.2.
Attach the end of the gun handle to the compressed air system (fig 4).
4.2.3.
Aim the nozzle of the gun into a safe area and depress the gun trigger (fig.5A) to check and adjust the gun nozzle to the required
suction and spread according to the viscosity of the fluid in the container or canister (fig.5B).
4.3.
extension probes.
4.3.1.
The SG19 is supplied with an extension probe (fig.2) which may only be used with thin fluids. The flexible probe is for spraying thin
fluids into cavities, between panels and inside doors etc.
Note: Probe is only suitable for use with thin fluids.
4.3.2.
for spraying “hard-to-reach” areas, the sG19 may be used with the optional sG191 long reach extension probe.
4.3.3.
To fit probe release the locking nut on the trigger nozzle (fig.6C) and remove the nozzle (D), retaining it in a safe place.
4.3.4.
Chose the appropriate extension nozzle, and insert the sprung brass pick-up into the end of the trigger hose outlet (fig.7E) and secure
with the locking nut (fig.7G).
5. Maintenance
warning!
ensure you remove the gun from the air supply before attempting any maintenance.
5.1.
It is very important to keep the gun and components clean to ensure free passage of fluids in use.
5.2.
After use clean all items especially probes with a suitable solvent and allow to dry before storage.
warning!
do not
use any component that has become blocked as this may build up excessive air pressure and cause canister to
explode.
sealey group, Kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
01284 703534
www.sealey.co.uk
enVironMent protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
weee regulations
dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid
waste authority for recycling information.
note
: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important
: no liability is accepted for incorrect use of this product.
warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. to obtain a parts listing and/or diagram, please log on to
www.sealey.co.uk, email [email protected] or telephone 01284 757500
fig.6
fig.7
fig.4
fig.5
sG19.V2 | issue:3 (l) 05/09/17
Original Language Version
© Jack sealey limited
