2. INTRODUCTION
3-in-1 high capacity, compact, portable air conditioner with cooling and dehumidifying functions. Thermostatically controlled with built in 24hr
timer and sleep mode. Soft-touch control panel with LED digital display and remote control. Self-evaporating system reuses the moisture
it collects from the air to help with the cooling process allows better e
ffi
ciency, low maintenance and powerful cooling. Water-full indicator
with auto shut o
ff
. Supplied with extendible exhaust ducting with window kit for ventilation and continuous drain hose. Eco-Friendly R290
refrigerant. Air conditioning temperature range 16-32°C. Washable
fi
lter. Auto-defrost function at low ambient temperature. Mounted on castor
wheels for manoeuvrability.
3. SPECIFICATION
Model No.: .........................................................SAC9002.V2
Cooling Capacity: ..................................................9000Btu/hr
Discharge Side Pressure: ..........................................3.2MPa
Energy Rating: .................................................... A (EER:2.6)
IP Rating: ....................................................................... IPX1
Mass of Refrigerant: ....................................................... 170g
Maximum Air
fl
ow: .....................................................330m³/hr
Maximum Exhaust Hose Length: ................................... 1.5m
Maximum Water Extraction Rate: .............................. 25L/day
Noise Level: ............................................................. 65db (A)
Power: .........................................................................1005W
Rated Capacity: ..........................................................2600W
Refrigerant: ................................................................... R290
Suction Side Pressure:...............................................0.7MPa
Supply: ................................................................ 230V~50Hz
4. CONTENTS
5. INSTALLATION
Unpack the product and check contents. Should there be any damaged or missing parts contact your supplier immediately.
5.1.
LOCATION
5.1.1.
Place the appliance on a
fi
rm, level surface.
5.1.2.
Ensure that there is a clear area of at least 500mm (20 inches) around the appliance (
fi
g.2) to
allow for adequate air circulation.
DO NOT
operate the appliance in close proximity to walls, curtains or other objects that may
block the air inlet or outlet.
WARNING!
DO NOT
locate the appliance where it is subject to:
Heat sources such as radiators, ovens or similar
Direct
sunlight
Mechanical vibration or shock
Excessive
dust
Lack of ventilation i.e., inside a cabinet or bookcase
Uneven
surfaces
5.2.
ASSEMBLE THE EXHAUST HOSE
WARNING!
The air conditioning unit must be vented to outside. This ensures that any heat and moisture is removed from the
designated room space.
5.2.1.
Screw
fi
t the hose connector to one end of the exhaust hose (
fi
g.3).
5.2.2.
Screw
fi
t the window kit adapter to the other end of the exhaust hose (
fi
g.4).
SAC9002.V2 Issue 1 24/01/22
Original Language Version
© Jack Sealey Limited
ITEM
DESCRIPTION
1
Control panel
2
Air outlet with adjustable louvre
3
Handle
4
Air inlet and filter
5
Castor wheel
6
Drainage hole
7
Air exhaust
ACCESSORIES
8
Exhaust hose
9
Hose connector
10
Window kit adaptor
11
Remote control
12
Window kit
13
Drain hose (not shown)
fi
g.1
fi
g.2
