Sealey SAC9000 Скачать руководство пользователя страница 3

4. INSTALLATION

SAC9000 - 1 - 241106

CONTENTS  / MAIN FEATURES (See fig.1)

1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Panel
2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Outlet
3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handle
4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Castor
5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Filter
6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Inlet
7 . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust Air Outlet
8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cable Stowage

9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water Stopper
10 . . . . . . . . . . . . . . . . . . Inner Exhaust Duct Adaptor
11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exhaust Duct
12 . . . . . . . . . . . . . . . . . . Outer Exhaust Duct Adaptor
13 . . . . . . . . . . . . . . . . . . . . . . . Water Collection Tray 
14 . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control
15. . . . . . . . . . . . . . . . . . . . . Outer Exhaust Duct Cap

Fig.2

Fig.3

4.1 Assembling the exhaust duct.

See fig.2. First extend each end of the duct (11) and attach the inner adaptor 

(10) and the outer adaptor (12) using a clockwise threading action. Push the inner adaptor into the exhaust air 
outlet on the back of the unit. See fig.1-7. The exhaust can be extended from 0.55m to 1.55m. The unit is at its 
most efficient when the air duct is shorter. Use only the duct supplied. Do not further extend the length of the duct
with other ducting as this will reduce the efficiency of the unit.

4.2 Exhaust duct placement.

See fig.3. Site the unit close to a door or window that can be left ajar, as indicated 

below. Place the end of the duct in the opening and if necessary tie it in place. Do not allow the duct to be 
overstretched. Do not allow the duct to be kinked or distorted or blocked as this will overheat the unit. If the unit 
becomes overheated it will automatically shut down.

Содержание SAC9000








Отзывы: