6. TROUBLESHOOTING
The Problem
The Solution
One or two lights come on, you plug in the charger for 20
hours and there is no change in status of lights.
Check charger to see if it is charging. Charger should be warm.
Check all connections.
Charger works well but still no change in status of lights.
Possible defective battery or faulty breaker. Try a DC device (such as a light) fitted
with a lighter plug to see if it works. If it works, Roadstart breaker is OK and the
batteries are the problem.
No lights comes on, but when the AC adaptor is plugged
into the Roadstart, all the lights come on.
The internal batteries of the Roadstart must be replaced
Roadstart is fully charged but has no power.
Check where the wire meets the jaw on the Roadstart clamp. Make sure they are
well crimped.
When using an accessory through accessory / cigarette
lighter outlet on the power pack, clicking is heard coming
from inside the pack.
Accessory is drawing more than 12 amps causing circuit breaker to cycle on and
off. Check accessory for problem (i.e. short circuit).
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
RS1224.V2 Issue: 5 - 23/12/11
Question
Answer
How many jump starts can a fully charged Roadstart do
before needing to be recharged?
Between 1 and 30 depending upon operating factors such as temperature, general
condition of the vehicle, engine type and size.
Can a Roadstart be recycled?
Yes, in accordance with local authority regulations.
What is tyhe ideal in-use storage temperature of the
Roadstart?
Room temperature. The Roadstart will also operate at temperatures below zero,
power, however, will be lessened. Intense heat will activate self discharge.
Is the Roadstart fool-proof?
No. All jump starting instructions must be followed carefully.
Can i replace the power pack battery
Yes, but note: the battery is not covered by warranty as it is a consumable item.
I have a Regular 10amp battery charge, can i use it to
recharge the roadstart?
No, only the supplied AC charging adaptor can be used.
7. QUESTIONS & ANSWERS
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner which is compatible
with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
Contact your local solid waste authority for recycling information.
Battery Removal
WARNING!
To avoid electric shock, ensure the roadstarts battery is depleted and ensure the negative black cable is removed
first. Remove all the screws around the roadstart and separate the casing, disconnect the battery leads from the battery
terminals removing the black negative cable first.
Dispose of batteries according to local authority guidelines
.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme.
Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705
