background image

RE23RS | Issue 3 (U) 09/03/20

Original Language Version

© Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

 01284 757500 

 01284 703534 

 [email protected] 

 www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to 
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely 
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids 
according to local regulations.

Note

: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

Important

: No Liability is accepted for incorrect use of this product.

Warranty

: Guarantee is 12 months from purchase date, proof of which is required for any claim.

5.  OPERATION

5.1.    

All the loops of the restraint system, except side restraint (Item 5) can be readily swept up and away from the work area (fig.9 & 10).   

 

These loops go beyond the vertical to a self supported leaning position. Item 5 sweep path is limited by a mechanical stop.

5.2.    

Side restraint (Item 6) lifts and holds the other hoops in place, this allows access to the pins on the main beam (fig.9 & 10).

5.3.    

Ensure cage is fully lowered before compressing a spring. 

6.  MAINTENANCE

6.1.    

The robust nature of the restraint system means that it only requires cleaning after use with a lightly oiled cloth.

6.2.    

Check freedom of loop sweep, which should result from the cleaning/lubricating process in 6.1.

6.3.    

Replace immediately any part that is or appears to be damaged. 

Содержание RE23RS

Страница 1: ...ing chain around the spring ensure the restraining chain is not trapped in the coils of the spring as compressed 9 Always fit the coil spring compressor restraint system 1 3 OPERATIONAL SAFETY 9 When applying compression to the spring always stand to one side of the unit DANGER Stop compressing the spring as soon as the top cap of shock absorber is no longer under load Never allow coils to touch e...

Страница 2: ...4 4 Slide the pillar adaptor bar Item 1 over the main pillar of the coil spring compressing station Models RE231 RE2311 or RE232 not included with the pinch knob facing the same direction as the yokes front fig 1 Secure in place by sliding the pin Item 12 through the appropriate hole from left to right on the main beam and insert the R clip Item 13 through the pin to secure fig 1 NOTE Height is de...

Страница 3: ... 4 11 Place washer item 3 at each end of spindle and wind on hexagon stiff nuts item 4 with equal engagement without clamping the assembly All loops to pivot freely under their own weight limited only by the lugs the right hand side hoop has limited movement 4 12 The left hand side hoop rotates fully to allow access to the pins in the main pillar fig 9 10 WARNING Always fit the restraining chains ...

Страница 4: ...ications and component parts without prior notice Important No Liability is accepted for incorrect use of this product Warranty Guarantee is 12 months from purchase date proof of which is required for any claim 5 OPERATION 5 1 All the loops of the restraint system except side restraint Item 5 can be readily swept up and away from the work area fig 9 10 These loops go beyond the vertical to a self ...

Отзывы: