2-STROKE PETROL EARTH AUGER
MODEL NO:
PHA100
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1.
GENERAL SAFETY
WARNING! THIS MACHINE MAY CAUSE SERIOUS INJURIES.
Read the instructions carefully for handling, preparing,
maintaining, starting, stopping and operating the machine. Learn about all the controls and proper use of the machine.
WARNING!
When using this type of tool, basic precautions should always be followed to reduce the risk of fire, electric shock and
injury.
9
Read all instructions carefully before attempting to use this product and retain these instructions. Be familiar with all the operations
described in these operating instructions.
9
This product must be operated only by experienced users.
9
If you are giving this machine to others, please also provide them with this instructions manual.
9
Use this machine as described in this instruction manual. It is strictly forbidden to use this tool for applications other than those
described in this manual.
9
Failure to follow these instructions can result serious injuries or death.
9
Never let people unfamiliar with these instructions or children use this product.
9
Keep in mind that the operator or user is responsible for accidents or risks to other persons or their property.
8
DO NOT
use the tool if you have consumed alcohol, are tired, under the influence of drugs or ill.
DO NOT
use the tool if you are not
in an adequate physical condition.
9
This tool is intended for outdoor use. Never use it indoors.
9
Never allow children use the machine.
9
Dress properly!
DO NOT
wear loose fitting clothing or jewellery that can be caught in moving parts. Use of resistant gloves, non-slip
shoes and safety glasses is recommended; stop the engine or disconnect it before:
cleaning or clearing a blockage;
checking, maintaining, or working on the machine;
when adjusting the working position of the cutting device.
9
Never add fuel to a machine with a running engine or when it’s hot.
DO NOT
inhale fuel fumes as they are toxic.
9
Always inspect the machine before and after operation.
8
DO NOT
attempt to repair the machine unless you are qualified to do so. Repairs should be carried out only by an authorized service
centre or a similar qualified specialist.
8
DO NOT
use the machine with a damaged or excessively worn cutting device.
9
To reduce the risk of fire, keep the engine and exhaust free from debris, leaves or excessive lubricant.
9
Always make sure that all handles and guards are installed when operating the machine.
9
Never attempt to use an incomplete machine or a machine equipped with an unauthorized modification.
9
When transporting or storing the machine, always original packaging for device protection.
9
Always be aware of your environment and pay attention to possible dangers that cannot be heard due to the noise of the machine.
9
Keep people and animals away from the work area. Children and people who do not know how to use this tool should not touch it
and handle it.
9
Use the product only under daylight or under good artificial light.
9
When using the machine, always wear full protective equipment including a helmet, protective mask, ear protection, gloves, non-slip
footwear and protective clothing.
9
Wear appropriate clothing.
DO NOT
wear loose or unbuttoned shirts.
DO NOT
wear jewellery that may come in contact with moving
parts. If you have long hair, tie them down and wear an appropriate safety helmet.
8
DO NOT
operate the product with damaged guards or shields not in place.
9
Keep hands and feet away from the unit at all times, especially when turning the tool off and on.
8
DO NOT
use the tool in an area where ventilation is poor. Gas emissions can cause injury.
8
DO NOT
use the tool when it’s raining or during bad weather.
DO NOT
use the tool in damp locations.
8
DO NOT
use the tool in the presence of flammable liquids or gases.
WARNING!
The machine releases gases when it is used. Avoid coming into contact with these gases.
9
Keep the work area clear. Before working, inspect the work area and remove any materials or objects that could cause accidents.
9
Survey the area to be worked prior to starting to avoid hitting underground services i.e. electricity cables, phone lines etc.
9
Keep the tool and drill clean for better and safer performance. Follow the instructions in this manual to lubricate and change the
accessories.
9
Turn off the tool after use, when you leave it unattended, when changing the accessories and before servicing.
PHA100 Issue 2 (3,4) 17/09/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Hot surfaces
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Wear safety
footwear
Wear protective
clothing
Warning:
Flammable liquid
