4. SET-UP
Model No.
. . . . . . . . . . . . . . . . . . . . .
PC3455
Manifold Pressure . . . . . . . . . . . . . . . 2000psi
Pressure at Nozzle . . . . . . . . . . . . . . 3450psi
Water Flow . . . . . . . . . . . . . . . . . . . .450ltr/hr
Motor Power . . . . . . . . . . . . . . . . . . . .2400W
Input Voltage/Current . . . . . . . . . . .230V/10A
Rec. Power Supply . . . . . . . . . . . . . . . . . 13A
Motor Speed . . . . . . . . . . . . . . . . . . 2800rpm
Max. Inlet Temp. . . . . . . . . . . . . . . . . . . 50
°
C
Hose Length . . . . . . . . . . . . . . . . . . . . 5.5mtr
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 18kg
Trolley Included . . . . . . . . . . . . . . . . . . . . Yes
3.1. SPECIFICATION
4.1. Connecting the water supply.
Use a reinforced hose pipe with an internal diameter of 1/2” and connect to the mains water supply as
indicated in fig.1. Screw a push fit hose connector ( fig.2-1) to the water inlet on the machine ( see fig.2-2). The water supply should
have a minimum pressure of 1.5 bar and a maximum pressure of 6 bar, with a minimum flow rate of 7ltr/min,
4.2. Connecting the high pressure hose.
Remove and discard the transit plug from the water ‘out’ connector on the lower front of the
machine (See fig.3). Attach the high pressure hose as indicated in fig.4 ensuring that the connector is tight. Turn on the water supply.
4.3. Assembling the lance and nozzle.
Push the gun onto the lance as shown in fig.5. There is a spring within the mouth of the gun.
Push the lance against the spring and turn through 90
°
until it clicks into place. Insert the nozzle required into the end of the lance as
shown in fig.6 and screw it down. When the nozzle is seated give it a final twist so that it clicks into place. Item 6 is the standard
nozzle with adjustable spray pattern. Item 7 is the rotorblast nozzle.
Original Language Version
PC3455 Issue No.2 19/08/10
