Before activating the trigger, GRIP the gun firmly to counteract the recoil from the high pressure water jet.
WARNING!
Avoid sudden bursts of water as these will cause water pressure to drop and put extreme pressure on hoses and
connectors.
If, during operation, power failure occurs turn the electricity and water off for safety reasons, (See Note ‘c’ at end of Section 4).
WARNING!
The high pressure jet will cause loose particles to be propelled at high speed, which may cause serious injury.
WARNING!
DO NOT operate the machine without a water supply. Dry running can seriously damage the unit.
WARNING!
DO NOT leave the washer switched on for more than 15 minutes without operating the trigger.
DO NOT
obstruct ventilation grills during operation.
DO NOT
use the washer with flammable or toxic liquids or any other product. Use only recommended detergent. Unapproved
detergents may corrode the machine cover and accessories.
DO NOT
jam the trigger in the operating position.
DO NOT
adjust any internal control valves, as they have been factory set.
DO NOT
connect other appliances to the machine inlet or outlet.
DO NOT
use in damp or wet weather conditions.
DO NOT
move the unit by pulling the hoses or electrical cables. Use the handle.
DO NOT
touch plug with wet hands. To avoid the risk of electrocution keep all connections dry and off the ground.
DO NOT
direct jet against yourself, other persons, animals, electrical equipment or the machine itself.
DO NOT
use washer if you are tired or under the influence of alcohol, drugs or intoxicating medication.
DO NOT
allow children or untrained persons to operate the washer.
WARNING!
Discharge residual pressure before disconnecting the washer hose. Pressure left in unit may cause injury.
After use, disconnect washer from electrical mains and water supply and store in a safe, dry, childproof area.
3 . CONTENTS &SPECIFICATION
1
Lance
2
Gun
3
High pressure hose
4
Holder
5
ON/OFF Switch
6
High pressure hose connector
7
Water inlet
8
Detergent reservoir plug
9
Accessory holder
10
Variable nozzle head
11
Rotorblast nozzle head
12
Water plug
13
Optional hose reel kit
Unpack the product and check contents against the list below. Also check that the machine has an identification plate or label. If label or
parts are damaged or missing contact your supplier immediately.
By rotating the stream of water at high speed, it is possible to increase the effective cleaning pressure of washer. We quote the pressure at
which the water leaves the pump as ‘Manifold Pressure’ and express the cleaning power of the washer as the ‘Effective Cleaning Pressure’.
This heavy duty unit produces enough power to pump 450 litres of water every hour. The unit is powered by high quality electric induction
motor. The pump unit is fitted with a high pressure by-pass to preserve pump life. Features Automatic Total Stop system which switches the
motor on and off when the lance trigger is operated, prolonging the motor life. Supplied with hose, trigger and Rotablast cleaning nozzle which
helps develop the same Effective Cleaning Power (ECP) as a 3450psi washer. Includes foam applicator for pre-wash. Suitable for a wide
range of automotive, industrial, agricultural, marine and domestic applications. PC3455 features in addition to the integral detergent tank,
various optional extras including Hose reel kit, Model No. PCHOSE, Rotary brush for patio cleaning, Model No. PCPATIO, Drain kit, Model
No.AK127/F, Sand blasting kit, Model No. AK128/F and Rotary brush, Model No. AK125/F.
2. INTRODUCTION
Original Language Version
PC3455 Issue No.2 19/08/10
