background image

Environmental Protection 

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be 

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

WEEE Regulations 

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and 

Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally 

protective way. Contact your local solid waste authority for recycling information. 

13. TROUBLESHOOTING

Cleaner will not operate.

No power supply.

Faulty power cable, switch or motor.

Container full of liquid.

Check supply.

Check and repair or replace faulty item.

Empty container

Dust comes from the motor cover.

Filter missing or damaged.

F

it or replace dust filter.

R

educed efficiency and increased

Motor speed/vibration.

No solution spraying out.

Leak from drum connector

Filter clogged.

Nozzle, hose or container inlet blocked.

Switch in wrong position.

Shampoo tank is empty.

I

ncorrectly fitted trigger or pipes.

O Ring on male connector damaged

C

lean or replace filter.

Check nozzle, hose and container inlet for 

blockage.

Turn switch to the required position.

Add more shampoo.

C

heck fittings and connections. Ensure there 

are no

Kinks in tubes

Replace O Ring.

Sole UK Distributor, Sealey Group.

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk.

IP32 7AR

01284 757500

01284 703534

www.sealey.co.uk

[email protected]

 

Original Language Version

 

© Jack Sealey Limited

Parts support is available for this product. To obtain a parts listing and/or diagram, 

please log on to www.sealey.co.uk, email [email protected] or telephone 

01284 757500.

PC310  Issue:7(S) - 27/05/15

Содержание pc310









Отзывы: