Sealey pc310 Скачать руководство пользователя страница 7

10. MAINTENANCE

GENERAL MAINTENANCE

Ensure the machine is unplugged from the power supply.

10.1.  Disconnect the hose from the container.

10.2.  Undo the clasps and remove motor head from the container.

10.3.  Clear out any dirt or debris from the container and hose.

10.4.  C

lean the foam filter by washing it in a mild soapy solution.

10.5.  Check that the telescopic suction tube operates smoothly, and check the power cable to make sure it has not received any damage.

10.6.  C

heck the O Ring (fig.4) on the mail connector (fig.1.33) for wear. Replace if necessary. from fig1.32.

CARTRIDGE FILTER MAINTENANCE.

 

See also Section 6

10.7.  H

andle the filter carefully when cleaning or installing. 

10.8. 

 Carefully remove the cartridge filter (A) and inspect it for damage. A filter that has small holes or tears in it will not perform efficiently and 

should be replaced.

10.9.  T

o clean a dry filter, tap it inside a waste bin. (B) 

10.10. 

DO NOT

 use a wet cartridge filter for dry vacuuming as the   filter will clog quickly. To clean a wet cartridge filter it should be  rinsed 

from the inside (B) and allowed to air dry for 24 hours.

10.11. 

To fit a new/cleaned filter slide it over the filter basket (C) and push it home fully.(D).

MAINTENANCE

11.  MAINTENANCE

GENERAL MAINTENANCE

.

11.1.  Ensure the machine is unplugged from the power supply.

11.2.  Disconnect the hose from the container.

11.3.  Undo the clasps and remove motor head from the container.

11.4.  Clear out any dirt or debris from the container and hose.

11.5.  C

lean the foam filter by washing it in a mild soapy solution.

11.6.  Check that the telescopic suction tube operates smoothly, and check the power cable to make sure it has not received any  

damage.

11.7.  C

heck the O Ring (fig.4) on the mail connector (fig.1.33) for wear. Replace if necessary. from fig1.32

12. CONSUMABLES

Cartridge Filter (Must be used for dry vacuuming) ................. 

Model No. PC310CF

Foam Filter (Pack of 10). ........................................................ 

Model No. PC200FF10

IMPORTANT! IF THE MACHINE IS USED WITHOUT A CARTRIDGE FILTER FITTED THE MOTOR WILL BURN OUT EVENTUALLY AND 

YOUR GUARANTEE WILL BE INVALIDATED. ALWAYS KEEP A SPARE CARTRIDGE FILTER HANDY.

Dust Bags (Pack of 5) Optional Extra. .................................... 

Model No. PC200PB5

fig 4

 

Original Language Version

 

© Jack Sealey Limited

PC310  Issue:7(S) - 27/05/15

Содержание pc310









Отзывы: