p
p
WARNING! Ensure you read, understand and apply Section 1 Safety Instructions.
Reminder: DO NOT vacuum hazardous substances. Use of an incorrect dust bag will invalidate your warranty.
4.1
Ensure the machine is unplugged from the power supply.
4.2a
Remove the top section and fit the dust bag flange onto the inlet
stub, taking care not to damage the bag.
4.2b
Alternatively, slide the optional cartridge filter down over the filter
basket and push fully home.
4.3
Reposition the head onto the drum body, and clip in place.
4.4
Insert the larger end of the flexible hose into the front inlet on the
container and lock in place. Push the required attachment onto
the free end of the hose.
4.5
Plug in the power supply.
4.6
Switch to the On (position I).
4.7
When you have completed vacuuming, press the switch to Off (position
O)
,
and unplug from power supply.
Regularly check the dust bag and dispose of safely when it is 2/3 full. The bag is manufactured so that only air, not dust, will pass
through the paper and as such the dust bag
must not
be re-used. If you wish to use the machine for a wet application and the dust bag
is less than 2/3 full, carefully remove the bag, store for future use, and wipe the tank clean.
7
DO NOT
use the dust bag for wet or sharp materials.
2. CONTENTS AND SPECIFICATIONS
2.1
Carton content
2.1.1 Carefully unpack the carton.
2.1.2 Locate the two side clasps (fig. 1.6) which hold the top section
(fig.1.3) in place.
2.1.3 Undo the clasps, remove the top section and take out the items
in the container.
2.1.4 Check and identify each component as listed below. If anything
is missing or damaged please contact your supplier immediately.
2.2
Specification
Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V 1250W
Container - PC200SD: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ltr
Container - PC300SD: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ltr
Weight - PC200SD: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8kg
Weight - PC300SD: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9kg
Vac AccessoriesØ:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35mm
Filter (See Sect.9 Consumables) - Dry: . . . . . . . . . . . . . . . Dust Bag
Filter (See Sect.9 Consumables) - Dry: . . . Cartridge Filter (optional)
Filter (See Sect.9 Consumables) - Wet: . . . . . . . . . . . . . . . . . Foam
4. DRY VACUUM CLEANING
3. ASSEMBLY
PC200SD & PC300SD - 2 - 161204
3.1
Ensure the mains plug is disconnected.
3.2
Undo clasps.
3.3
Lift off the top section assembly.
3.4
Remove contents from inside the container.
3.5
Turn the container upside down and insert the castors ensuring
they are pushed all the way in.
3.6a
For wet vacuum cleaning fit the supplied foamed plastic filter.
3.6b
For dry vacuum cleaning use the supplied dust bag.
3.6c
Alternatively, for dry vacuuming use the optional cartridge filter.
3.7
Replace the top section onto the container.
3.8
Align up the top section with the clasps and snap into place,
by applying pressure at the mid point of the clasps.
3.9
Insert the large end of the hose into the front inlet of the container
and lock in place by turning clockwise a quarter turn.
3.10
Choose the desired nozzle and push it onto the telescopic suction
tube.
5. WET VACUUM CLEANING
p
p
WARNING!
Ensure you read, understand and apply Section 1 Safety Instructions. Reminder:
Remove plug from power supply
before opening unit. DO NOT vacuum solvents, explosives, inflammable and/or hazardous liquids such as petrol, oil, spirits, paint,
thinners, acids etc.
Item Description
Item Description
1
Handle
10
Flexible vacuum hose
2
ON/OFF switch
11
Telescopic suction tube
3
Top section
12
Blow connection
4
Filter basket
13
Combination nozzle
5
Safety float valve
14
Dust bag
6
Clasp
15
Foamed plastic filter
7
Container, (Stainless Steel)
16
Crevice nozzle
8
Vacuum hose connection
17
Cartridge filter (optional)
9
Castors
fig 1
