5. OPERATION
5.1.
Take the wheel clamp and place it over the wheel, with the locking plate facing outwards (fig.4).
NOTE!
Take care not to damage vehicle bodywork or wheels
5.2.
Attach the locking bar ‘D’ (fig.5) to the locking plate, hold the key fully anti-clockwise and push it in until contact is made with the
tyre, this will ensure a tight fit.
5.3.
To remove, reverse procedure 4.1 to 4.3.
P
B397.V3 | Issue 1 01/08/2019
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [email protected] or 01284 757505.
Important:
No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Parts support is available for this product. Please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500
fig.4
fig.5
