4.2.
OPERATION
4.2.1.
The lamp has a magnetic base to fix to ferrous materials and a hook to hang the lamp.
4.2.2.
By pulling the base from the main body the 360°, tilt function can be used enabling the lamp to be positioned in any direction.
4.2.3.
To turn on the lamp rotate the switch on the back of the lamp clockwise. Further rotation will increase the brightness of the lamp.
4.2.4.
Rotate anti-clockwise to switch off.
4.2.5. To turn on the torch press the button on the back of the unit.
4.2.6.
To turn on the UV LEDS, press the button a second time.
4.2.7.
To turn off, press again.
5. CLEANING
8
DO NOT
use solvent or abrasive cleaners, clean with a damp cloth.
fig.1
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
LED3604UV Issue:1 12/06/18
Original Language Version
© Jack Sealey Limited
BATTERY REMOVAL:
to remove battery at end of life, split the light casing by removing the 12 screws and saver the wires witt wire
cutters
.
Dispose of the battery in an approved manne
r.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd
are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered
with Valpak’s registered compliance scheme.
Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
