5W COB LED RECHARGEABLE HEAD TORCH
WITH AUTO SENSOR
MODEL NO:
HT111R
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1.
GENERAL SAFETY
8
DO NOT
shine directly into your, another person’s or an animal’s eyes.
8
DO NOT
allow children to use the torch.
8
DO NOT
use the torch if you suspect that the battery or the torch casing is damaged.
8
DO NOT
leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manner.
1.2.
BATTERY SAFETY
WARNING!
To reduce the risk of burns or fire:
8
DO NOT
attempt to open the batteries.
8
DO NOT
crush, puncture, short contacts or dispose of in fire or water.
8
DO NOT
expose to temperatures above 60°C (140°F).
9
Replace only with the batteries designed for this product.
9
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin, thoroughly rinse with water. If it gets in your eyes, rinse thoroughly with cool
water and seek immediate medical attention.
2. INTRODUCTION
Hands-free 5W COB LED spotlight with 40° angle adjustment. Dimmer switch allows brightness to be adjusted from 20% to 100%. Main light
has one switch with four functions, on, flash, auto-sensor and off. Hold down switch to enable auto sensor function which will allow turning on/
off just by waving hand in front. Rear of strap includes a red LED warning light which has two functions, flash or on, ideal for a cycling light.
Adjustable headband and foam brow for added comfort. Includes a battery charging level indicator. Powered by rechargeable 3.7V 2.2Ah Li-ion
battery. Supplied with micro USB charging lead.
3. SPECIFICATION
MODEL NO: .............................................................. HT111R
Battery: .......................................................3.7V 2.2Ah Li-ion
Charging Time: ...............................................................3.5hr
LED Qty: .......................................................... 5W COB LED
Lumen Output: ................................ High; 450lm, Low; 110lm
Nett Weight: ................................................................... 225g
Operating Time: ................................. High; 2.5hr, Low; 8.5hr
4. OPERATION
4.1.
TORCH OPERATION
4.1.1.
Press power button (fig.1) once to turn light on.
4.1.2.
Press the power button twice (fig.1) to put it into flash
mode.
4.2.
LIGHT SENSOR
4.2.1.
Press power button for three seconds until infra red
led illuminates.
4.2.2.
Pass hand in-front of light until light comes on.
4.3.
RED LIGHT ON POWER PACK
4.3.1.
Press power button on power pack (fig.2) once for
solid red light.
4.3.2.
Press twice for flashing red light.
5. MAINTENANCE
5.1.
CHARGING:
Connect the USB lead to the port
on the rear of the power pack (fig.2) and a USB
power socket. Turn on the power supply.
5.2.
Keep the torch clean by wiping with a damp cloth.
fig.1
fig.2
H
T111R Issue 1 29/05/19
Original Language Version
© Jack Sealey Limited
Refer to
instructions
