Sealey HBS97, Инструкции

Страница: 4 / 4

The Headlamp Beam Tester ( Floor Mounted version only ) is equipped with a spirit level located on the base of the optical box which is visible
through the transparent panel by turning on the vehicle head lights. To level the box, open the clutch lever located on the side of the box
and move the box until the spirit level registers correctly. Re-tighten the clutch lever “L”. The box level must be checked every time it is used
on a different working surface.
14. 1. The paint work is detergent resistant. Clean with a damp cloth, removing any stains. A small amount of alcohol may be applied
to stubborn areas of grime.
14. 2. DO NOT leave the machine in areas where corrosive vapour is present, i.e. Battery charging or painting shops etc.
14 .3. DO NOT oil the column.
14 .4. An optical box dust cover is available upon request.
13. OTHER INFORMATION
14. CARE OF THE BEAM TESTER
1A TC024010004 Wheel for rails
1B TC024010005 Wheel for rails
2 TC024010001 Base rail
3 TC025010003 Case for column
4 TC020010045 Front wheel shaft
5 TC025010002 Turning column
6 TC025010004 Spring for vettical sliding system
7 TC024010002 Optical box
8 TC025030011 Black handle
9 TC025030014 Glass Ø200mm
10 TC025030013 Lens stand
11 TC027010037 inner panel
15 TC020010038 Spirit level
16 TC025020009 Brake spring
17 TC021010006 Coloured luxmeter
18 TC020010028 Steel cover
20 TC020020018 Electronic card wqith photodiode
21 TCNR5020033 Stopper 22x30mm
22 TC020010050 Plexiglass cover
23 TC025020005 Vertical sliding system (VSS)
24 TC025020007 Spring pusher
26 TC025020008 Stopper
27 TC025020006 Brakr got VSS
30 TC025020011 Mirror visor
35 TCNA2010037 Screw M8x110mm
36 TCNR5020008 Wheel handle Ø35mm
38 TC020010047 Wheel axle 15x45mm
39 TC022040010 Brake pedal
40 TC022040006 Brake pivot thread
61 TC025020010 Lower closing
64 TC025010068 Washer
65 TCND1010002 Bearing B/6005-RS
68 TC025010122 Plate for mirror visor
69 TC025010121 Compass for mirror visor
70 TC025010123 PVC Washer
72 TC025010119 OT Washer
73 TCNA1010034 Screw M10x80mm
74 TCNA2010011 Screw M8x60mm
75 TC021010023 Frame for luxmeter
76 TCNA0010009 Screw M6x16mm
77 TCNA1010034 Screw M4x16mm
78 TCNB1010006 Nut M8
79 TCNA0010026 Screw M8x20mm
80 TCNA0010005 Screw M6x50mm
81 TC020010037 Spring for spirit level
82 TCNB0010005 Nut M8
83 TCNA4010006 Screw 3.9x9.5mm
84 TC025020059 Rail kit complete
15. PARTS LIST
ITEM PART NO DESCRIPTION
Origin Date: 011297
Issue Date: 011297
Version No: 1
Modified Date: 071098
We suggest the unit is periodically checked for calibration in situ. If the unit is covered by a service agreement with the MOT package installer,
they will carry this out on your behalf. Should you wish to regularly check the calibration yourself, we recommend you purchase an Alignment
Device from your local dealer. Full instructions are provided with the re-calibration tool.
12. CALIBRATION
01284 757500
01284 703534
E-mail:
sales@sealey.co.uk
Sealey Group,
Bury St. Edmunds,
Suffolk. HBS97HBS971- 010798
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required
for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.