These ER & EM models are of the vertical type for heavy duty sanding applications. Each sander
has a tough composite body shell with a trigger operating switch and a power lock control.
Models ER150D/DFS & EM110D/DFS are dust free sanders for connecting to a dust free system.
Model:
ER150D
ER150D/DFS
EM110
EM110D/DFS
Free Speed (rpm) . . . . . . . . . .8000 . . . . . . . . . . . .8000 . . . . . . . . . .8000 . . . . . . . . . . . . . . .8000
Orbit Ø (mm) . . . . . . . . . . . . . . . .8 . . . . . . . . . . . . . . .8 . . . . . . . . . . . .n/a . . . . . . . . . . . . . . . .n/a
Pad size (mm) . . . . . . . . . . . . .150 . . . . . . . . . . . . .150 . . . . . . . .210x115
210x115accepts 4-1/2 paper
Thread size (UFN) . . . . . . . . .5/16 . . . . . . . . . . . .5/16 . . . . . . . . . .5/16 . . . . . . . . . . . . . .5/16
Power (Watts) . . . . . . . . . . . . . .450 . . . . . . . . . . . . .450 . . . . . . . . . . .500 . . . . . . . . . . . . . . .500
Power input . . . . . . . . . .230V-1.8A . . . . . . . . . . . .230V . . . . . .230V-2.0A . . . . . . . . . . . . . .230V
2. TECHNICAL SPECIFICATIONS
3. DUST COLLECTION MODELS ER150D/DFS & EM110D/DFS
The dust outlet tube on models ER150D/DFS & EM100D/DFS must be connected to a dust free
system in accordance with COSHH, and any other regulations that may apply to your work area. For
information on dust free systems, contact your local Sealey dealer.
Model ER150D may be converted to a dust free system, contact your local Sealey dealer for details.
p
WARNING!
Disconnect
sander
from mains power supply before changing accessories, servicing
or performing maintenance. Replace or repair damaged parts.
Use recommended parts only.
Non authorised parts may be dangerous and will invalidate the warranty.
5.1. Clean the underside of the sander after use. Use an air line to blow dust out from around the
motor by passing the air through the ventilation holes.
5.2. Change pads when required.
5.3. Check brushes after every 200 hours of use. To do so remove the top cover, remove the brass
brush holder electrical connection, remove the brush holder and examine the carbon bush.
Change brushes when they are only 5mm in length. Ensure the unit is correctly re-assembled.
5.4. All other service and maintenance must be carried out by an authorised service agent.
5.5. When not in use store in a safe, dry, childproof location.
4. OPERATING INSTRUCTIONS
5. MAINTENANCE
1.3. LEAD PAINT WARNING!
Paint once contained lead as a traditional ingredient. Contact with the dust from the removal
of such paint is toxic and must therefore be avoided. The following action must be taken
before using the sander on a surface that you suspect may have contained lead in the paint.
1.
User must determine potential hazard relating to age of paint to be removed.
(Modern paints do not have lead content).
2.
DANGER!
Keep all persons and pets away from the working area. The following
persons are particularly vulnerable to the effects of lead paint dust:
Expectant women,
Babies, and children.
3.
We recommend personal protection by using the following safety items:
a
/ Paint Spray Respirator (Our ref SSP16EN)
b
/ PE Coated Hooded Coverall (Our ref SSP266).
c
/ Latex Gloves (Our ref SSP24).
4.
Take adequate measures to contain the paint dust, flakes, and scrapings.
5.
Continue to wear safety equipment as in (3) above, and thoroughly clean all areas
when task is complete. Ensure paint waste is disposed of in sealed bags or containers.
4.1. Attach the correct rated pad for the sander. Round pads screw into the under side of the
sanders head, and rectangular pads will be held by a clamp located at each end of sander.
4.2. Plug the sander into the mains power supply (and if appropriate a dust free system).
Grip the handle and front guide knob and pull the on/off trigger to start the machine,
and check that the unit is working correctly before use.
4.3. The power trigger may be locked in the on position by depressing the trigger and then
pressing the side locking button. Press trigger again to release the lock button.
Note:
The sander is designed for dry use only. DO NOT use with water or any other liquids.
ER150/D, ER150/DFS, EM110, EM110D/DFS - 0050 - 010299
1.2.
General Safety.
p
WARNING!
Ensure health & safety, local authority, & general workshop practice regulations are
adhered to when using this equipment.
p
WARNING!
Disconnect from mains power before changing accessories, servicing or maintenance.
3
Maintain the
sander
in good condition (use an authorised service agent).
3
Replace or repair damaged parts.
Use recommended parts only. Non authorised parts may be
dangerous and will invalidate the warranty.
3
Use
sander
in an adequate working area for its function, keep area clean, tidy and free from
unrelated materials. Ensure there is adequate lighting.
3
Before use check abrasive pad condition. If worn or damaged replace immediately.
p
WARNING!
Always wear approved eye or face protection when operating the
sander
.
3
If dust is generated, use face, dust, or respiratory protection in accordance with COSHH regulations.
3
Depending on task, sander noise level may exceed 85dB in which case wear safety ear defenders.
3
Remove ill fitting clothing, ties, watches, rings, other loose jewellery, and contain and/ or tie back long hair.
3
Wear appropriate protective clothing and keep hands and body clear of the sanders working parts.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non slip shoes.
3
Keep children and unauthorised persons away from the working area.
3
Check moving parts alignment on a regular basis.
3
Ensure the workpiece is correctly secured before operating the
sander
. Never hold workpiece by
hand, and check the workpiece to ensure there are no protruding nails, screws, stones, etc.
3
Avoid unintentional starting.
7
DO NOT force the
sander
to achieve a task it was not designed to perform.
7
DO NOT operate
sander
if any parts are damaged or missing. This may cause failure or possible injury.
p
WARNING!
DO NOT sand any materials containing asbestos.
7
DO NOT carry the sander by the electrical cable or dust extraction hose.
7
DO NOT get the
sander
wet or use in damp or wet locations.
7
DO NOT use these models with water, these models are dry sanders only.
7
DO NOT place attachments close to your face and do not point at other persons or animals.
7
DO NOT operate
sander
if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT use where there is flammable liquids, solids or gases such as paint solvents, including
waste wiping or cleaning rags etc.
7
DO NOT leave the
sander
operating whilst unattended.
7
DO NOT carry the
sander
with your finger on the power switch.
3
When not in use disconnect from the mains power supply and dust free system and store
in a safe, dry, child proof area
p
WARNING!
DO NOT allow uncontrolled discharge of dust waste thus polluting the environment.
