2. INTRODuCTION
T
he 20V Series has been designed to suit users from the DIY enthusiast to the professional. These body only tools offer a one battery fits all
solution with a choice of 20V lithium batteries ranging from 2Ah to 4Ah, meaning costs can be kept down whilst quality remains high. Quality,
stylish, lightweight tools with durable composite housing and a soft grip making them comfortable and easy to use.
• Powerful, cordless, lightweight orbital sander.
• Durable composite housing with soft grip for added comfort.
• Three speed settings gives control to complete various tasks.
• Features a self-contained dust extraction port with dust collection bag.
• Fitted with Ø125mm hook-and-loop backing pad and supplied with two sanding discs.
3. SPECIFICATION
model no. ...............................................................CP20VoS
Pad Size..................................................................
Ø125mm
Battery ..............................20V 2Ah-4Ah li-ion (not included)
2Ah battery ........................................................... CP20VBP2
3Ah battery ........................................................... CP20VBP3
4Ah battery ........................................................... CP20VBP4
mains charger ....................................................... CP20VmC
no load Speed ......................................
5000/7000/9000rpm
Weight .........................................................................1.12Kg
noise power ...................................................................91dB
noise pressure ...............................................................80dB
Vibration .................................................................
7.521m/s²
Uncertainty .................................................................
1.5m/s²
4. OPERATION
WARNING:
ensure the tool has the battery disconnected before
attaching or changing any accessories, or making any adjustments.
4.1.
Selecting the right grade of sanding disc
4.1.1.
Sanding discs are available in a variety of different grades: coarse (60 grit), medium (120 grit) and fine (240 grit).
4.1.2.
Use a coarse grit to sand down rough finishes, medium grit to smooth the work, and fine grit to finish off.
4.1.3.
Always use good quality sanding discs to maximise the quality of the finished task.
4.1.4.
It is advisable to do a trial run on a scrap piece of material to determine the optimum grades of sandpaper for a particular job. If there
are still marks on your work after sanding, try either going back to a coarser grade and sanding the marks out before recommencing
with the original choice of grit, or try using a new piece of sandpaper to eliminate the unwanted marks before going on to a finer grit
and finishing the job
4.2.
Fitting a sanding disc
WARNING:
Always ensure that the battery pack is removed from the power point before fitting or removing sanding discs.
4.2.1.
note:
DO NOT
continue to use worn, torn or heavily clogged sanding discs. ensure foreign objects, such as nails and screws, are
removed from the workpiece before starting to sand.
WARNING:
DO NOT
use a sanding disc on wood that has previously been used on metal. This may cause scouring on the wooden
surface.
4.2.2.
Remove any dust or debris from the Hook & Loop Sanding pad, before fitting a sanding disc
4.2.3. match the holes in a suitable disc with the holes in the base and simply press the disc to the base to attach it.
4.2.4. To remove the disc, peel it away from the base.
4.2.5.
note: To maximise the life of the Hook & loop Sanding Base, peel the sanding disc off slowly rather than rapidly removing it to avoid
damage to the hook and loop system.
WARNING:
Take care to regularly clean out the build-up of dust on the base underneath the sanding disc and not to let the disc wear
completely down before replacing it. Failure to observe these two precautionary measures can lead to damage to the hooks and loops
on the base and the sanding disc will not attach properly.
WARNING:
never use the sander unless the entire base is covered by the sanding disc.
4.3.
Dust collection
WARNING:
Always use the dust collection bag if the sanding dust contains harmful substances, such as particles from old paint,
varnish, surface coatings etc. Always dispose of harmful dust according to local laws and regulations.
WARNING:
Take special care to guard against harmful and toxic dusts when sanding lead-based painted surfaces, woods and metals,
particularly if you are unsure about the exact substances involved. All persons entering the work area must wear a mask specially
designed for protection against the toxic dust and fumes involved. Children and pregnant women mUST noT enter the work area.
DO NOT
eat, drink or smoke in the work area.
4.3.1.
Push the dust collector onto the extraction pipe.
4.3.2.
To empty the bag pull the bag assembly from the extraction pipe, hold it upright and twist the cap anticlockwise to remove the cap.
dispose of as described in section 4.3.1.
WARNING:
For optimum dust extraction, remove and empty the dust Bag when it is no more than half full.
WARNING:
Remove and
DO NOT
use the dust Bag when sanding metal. Hot metal particles and sparks could ignite residual wood
dust, or cause the Dust Bag to catch fire. Always connect the sander to a suitable workshop dust extraction system when
sanding metal. Always clean the tool THoRoUGHlY when switching from sanding wood to sanding metal, and vice versa.
4.4.
Operation
WARNING:
Always wear eye protection, adequate respiratory and hearing protection, as well as suitable gloves, when working with
this tool.
WARNING:
DO NOT
touch the moving sanding disc.
note: Always use clamps to secure your workpiece to the workbench wherever possible.
WARNING:
never allow the sandpaper to completely wear down before replacing it. Failure to observe these precautionary
measures can lead to damage to the hook and loop surfaces, resulting in sanding discs failing to attach properly.
Original Language Version
© Jack Sealey limited
CP20VoS | Issue 1 10/04/18
