9
Wear eye protection. Further protective equipment for hearing, face, head, hands, legs and feet is recommended. Adequate
protective equipment will reduce personal injury from flying debris or accidental contact with the saw chain.
8
DO NOT
operate a chain saw in a tree, on a ladder, from a rooftop, or any unstable support. Operation of a chain saw in this
manner could result in serious personal injury.
9
Always keep proper footing and operate the chain saw only when standing on fixed, secure and level surface. Slippery or unstable
surfaces may cause a loss of balance or control of the chain saw.
9
When cutting a limb that is under tension, be alert for spring back. When the tension in the wood fibres is released, the spring
loaded limb may strike the operator and/or throw the chain saw out of control.
9
Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be whipped toward you
or pull you off balance.
9
Carry the chain saw by the front handle with the chain saw switched off and away from your body. When transporting or storing the
chain saw, always fit the guide bar cover. Proper handling of the chain saw will reduce the likelihood of accidental contact with the
moving saw chain.
9
Follow instructions for lubricating, chain tensioning and changing the bar and chain. Improperly tensioned or lubricated chain may
either break or increase the chance for kickback.
9
Cut wood only.
DO NOT
use chain saw for purposes not intended. For example:
DO NOT
use chain saw for cutting metal, plastic,
masonry or non-wood building materials. Use of the chain saw for operations different than intended could result in a hazardous
situation.
8
DO NOT
attempt to use the saw until you have an understanding of the risks and how to avoid them Serious injury could occur to
the operator or bystanders if used improperly.
9
Use of the chain saw for operations different than intended could result in serious injury to the operator or bystanders.
1.2.1.
CAUSES AND OPERATOR PREVENTION OF KICKBACK:
9
Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw
chain in the cut.
9
Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator.
9
Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.
9
Either of these reactions may cause you to lose control of the saw which could result in serious personal injury.
DO NOT
rely
exclusively upon the safety devices built into your saw.
9
As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.
9
Kickback is the result of chain saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper
precautions as given below:
9
Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on the saw and position your body
and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are taken.
DO NOT
let go of the chain saw.
8
DO NOT
overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of
the chain saw in unexpected situations.
9
Only use replacement guide bars and saw chains specified by the manufacturer.
2. INTRODUCTION
Ideal addition to your garden maintenance tool kit, combining high performance and functionality, featuring quality Oregon bar
and chain. Kick back protection with instant chain brake. Tool-less chain tensioning and changing. Automatic chain lubrication and
oil level indication display. Composite housing and soft grip handles makes it easy and comfortable to use. Requires compatible
20V battery and mains charger, sold separately.
3. SPECIFICATION
MODEL NO.
:
.......................................................
CP20VCHS
Motor Power:
.................................................................400W
N
oise Power/Pressure: .................................. 99.4/90.4dB(A)
N
o-Load Speed: .......................................................3300rpm
Bar Length: ...................................................................
25cm
Supply:
............................................................................. 20v
Vibration/Uncertainty: ....................................... 6.414/1.5m/s
2
R
eplacement Saw Chain: .........OREGON Pt. No. 91PX040E
4. OPERATION
CP20VCHS Issue 1 24/09/21
Original Language Version
© Jack Sealey Limited
ITEM
D
ESCRIPTION
1
R
ear Handle
2
B
attery Release
3
B
attery
4
Front Handle
5
Brake Controller
6
G
uide Bar Cover
7
G
uide Bar
8
S
aw chain
9
L
ever
10
S
procket Cover
11
T
ension Ring
fig.1
CONSUMABLES:
Batteries (not included):
CP20VBP2 - 2Ah Battery, CP20VBP4 - 4Ah Battery, CP20VBP6 - 6Ah
BatteryCharger (not included):
CP20VMC
